Novastar MX20 video control server features:

input output

• 2 types of video input interfaces

− 2×HDMI 1.3 (with loop output)
− 1×3G-SDI (with loop output)

• 10-bit/8-bit video source input
• 3 types of output interfaces

− 6×Gigabit network ports, 3.9 million pixels with maximum load
− 2×10G optical ports
− 1×SPDIF digital audio interface

• 3 types of control interfaces

− 1×Genlock synchronization signal input (with loop output)
− 2×Ethernet Ethernet control network port
− 1×AUX auxiliary interface

Features

• 3 independent layers

Supports adding up to 3 layers and setting them by Z order.

• Screen zoom

Supports 4 screen magnification modes including custom, point-to-point, screen
The fabric tiles and covers the screen.

• Color calibration

It supports 12-channel standard color processing from black and white and the three primary colors RGB.
Precisely adjust hue, saturation, and brightness.

• Full grayscale correction

Nova Nebula with high-precision correction system and C3200 scientific-grade phase
The machine generates its own correction coefficient for each gray level to ensure that each
The single-level uniformity of grayscale significantly improves display quality.

• Delay

− Supports low latency and can achieve low latency without reducing the load. independent
In master control mode, 0 frame delay on the controller side (less than 1 ms),
In video controller mode, there is a 1 frame delay on the controller side.
− Supports additional frame delay, the controller can add 0-2 delays Late.

• No rectangular frame restrictions

There is no rectangle frame limit when creating a special-shaped screen. Leaving it blank does not count as loading. The network port
The load calculation is the sum of the pixels of all screen cabinets.

• Frame rate adaptation

Adapt to various video input frame rates, including decimal frame rates. Support
User-defined frame rate and supports fine adjustment of frame rate in 0.01 Hz steps
Festival.

• Two equipment modes

It supports two modes: video control and independent master control.
− In independent master mode, one frame delay can be reduced.
− In video control mode, you can use functions such as multi-layer and zoom.

• Display system monitoring

Supports equipment status monitoring and display status monitoring, and automatically generates reports
Error and warning information.