Description
(16) GbE PoE+, (8) GbE PoE++ ports
(2) 10G SFP+ ports
400W total PoE availability
DC power supply ready for backup
Level 3 switching
Near silent cooling
Audio and Video Environments
When configuring Pro AV, select the option that matches your setup and the port(s) where audio and video devices are connected. Ports are configured individually for Pro AV and the options do not need to match on the same switch. The following options are available:
- Dante Audio – Matches Audinate Dante audio, PTP and control traffic.
- Q-SYS Audio and Video – Matches Q-SYS audio, video, PTP and control traffic.
- Q-SYS Video with Dante Audio – Matches Q-SYS video with Audinate Dante audio, PTP and control traffic.
- Shure Audio – Matches Shure audio, PTP and control traffic.
- Crestron Audio and Video – Matches Crestron audio, PTP, video and control traffic.
- AES67 Audio – Matches AES67 audio, PTP and control traffic.
- SDVoE with AES67 Audio – Matches SDVoE with AES67 audio, PTP and control traffic.
- SDVoE with Dante Audio – Matches SDVoE with Audinate Dante audio, PTP and control traffic.
- NDI with AES67 Audio – Matches NDI with AES67 audio, PTP and control traffic.
- NDI with Dante Audio – Matches NDI with Audinate Dante audio, PTP and control traffic.
| Mechanical | |
|---|---|
| Dimensions | 442 x 285 x 44 mm (17.4 x 11.2 x 1.7″) |
| Crowd | Without fasteners: 4.3 kg (9.5 lbs) With fasteners: 4.4 kg (9.7 lbs) |
| Case material | SGCC steel |
| Hardware | |
| Control panel | Ethernet In-Band |
| Network connection | (24) GbE RJ45 ports (2) 1/10G SFP+ ports |
| PoE connection | (16) PoE/PoE+ (Pins 1, 2+; 3, 6-) (8) 60W PoE++; PoE/PoE+ (Pins 1, 2+; 3, 6-) / PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 😎 |
| Full non-blocking power | 44Gbps |
| Switching capacity | 88Gbps |
| Transfer rate | 65.472 Mpps |
| Power supply method | (1) Universal input, 100—240V AC, 50/60 Hz (1) USP-RPS DC input, 52V DC, 7.69A; 11.5V DC, 2.61A |
| Power supply | AC/DC, internal, 450W |
| Supported voltage range | 100—240V AC |
| Max. power consumption | 50W (excluding PoE output) |
| Full PoE availability | 400W |
| Max. PoE power per port by PSE | PoE+: 32W PoE++: 64W |
| Voltage range PoE mode | PoE: 44—57V PoE+: 50—57V |
| ESD/EMP protection | Air: ± 16kV, contact: ± 12kV |
| LCD display | (1) 1.3″ touchscreen |
| Button | Factory reset |
| Shock and vibration resistance | ETSI300-019-1.4 Standard |
| Ambient operating temperature | -5 to 40°C (23 to 104°F) |
| Ambient operating humidity | 10 to 90% non-condensing |
| Certificates | CE, FCC, IC |
| Switching functions | |
| 2 layers of functions | IGMP snooping STP/RSTP with priorities and port-level blocking Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast/broadcast rate limiting MAC address blocking Current limitation 802.1X control Jumbo frames Own looped protection DHCP snooping/guarding Output speed limit LLDP-MED Port with restricted MAC address Device isolation with ACLs |
| 3 layers of functions | DHCP for locally managed networks DHCP relay Inter-VLAN routing between networks within the switch Static routing between local networks Network isolation with ACLs |
| LEDs | |
| System | Status |
| Ethernet | PoE Speed/link/activity |
| SFP+ | Link/activity |
| RPS | Status |
| Application requirements | |
| UniFi network | Version 5.10.5 and later |
